Honeywell VISTA-128BPT, Инструкция по установке и настройке, Страница: 109 / 124

Glossary
Glossary-3
H
• Hardwire Expansion: The ability to add additional hardwire zones to some controls by adding a hardwire expansion module
• Heat Detector (Heat Stat): A device that activates when the ambient temperature reaches 135 degrees (or 190); other
types measure quick rises in temperature (“rate of rise”)
• Holiday Schedule: A Holiday Schedule overrides the regular daily schedule on selected holidays throughout the year.
• Horn: An indoor sounder generally used in fire systems
• Horn-Strobe: An indoor sounder with a built in strobe light used in fire systems
• House ID: In a 5800 Series wireless system a 2-digit house ID can be used for feed back status for Keyfobs, wireless
keypads, etc
I
• Installer Code: The 4 digit code that allows the installer to enter the Panels programming mode; the installer code can not
be used to disarm unless it was used to arm.
• Instant Mode: One of the arming modes; when armed Instant all perimeter protection is on; all interior protection is off;
there is exit delay time but NO entry delay time.
J
• Junction Box: A box or splice point where wires come together or branch off in an installation
K
• Keypad: a.k.a. Console, Touchpad, Control pad; Used to control all system functions and programming
• Keyswitch: A device used to arm and disarm the system using a hard key
L
• LCD: Liquid Crystal Display
• LED: Light Emitting Diode
• Learn Mode: The learn mode allows 5800 Series wireless transmitters or V-Plex
®
Serial Poll devices to be programmed
into the system simply by tripping the device. (i.e. door or window); The 5800 series transmitters and V-Plex
®
Serial Poll
devices send unique serial numbers that are learned for that zone
• Limited Access: Some controls may be programmed to allow certain codes to only work during certain times. (*see also
Access schedules)
• Line Fault: Term used to describe the loss of telephone line voltage
• Line Fault Monitor, LFM: A device used to supervise the telephone line voltage at the control panel and to alert when the
line is cut. ie: 659en
M
• M.E.A.: Material Evaluation Authority; agency listing for commercial fire installations in Manhattan, New York
• Master Console: Some partitioned controls allow keypads to be designated as a “master” which displays the status of all
partitions at once.
• Maximum Mode: One of the arming modes; when armed maximum all perimeter and interior zones are protected with no
entry delay (when initially arming you will have an exit delay).
• Multiplex Loop: a.k.a. polling loop, V-Plex
®
; some controls can support multiplex expansion devices such as PIRs, smokes,
8 zone expanders, etc.
N
• NBFAA – National Burglar and Fire Alarm Association; a national association comprised of security and fire industry
professionals; provide training for people in the security/fire industry;
• NFPA: National Fire Prevention Association: a national association that sets forth standards for fire system installations
• Night-Stay Arming: arming the system in the stay mode, however (depending on the panel) you can choose which interior
zones will not be bypassed.
O
• Open/close by user: Primarily in commercial application open/close (arm/disarm) reports along with the user number may
be sent to the central station; also logged by the event log in some controls