Honeywell THX9321 Prestige 2.0 Скачать руководство пользователя страница 130

Страница: 130 / 160

THX9321 PRESTIGE

2.0 AND THX9421 PRESTIGE

IAQ WITH EIM

68-0311—02

130

REMOTE INDOOR SENSORS

For installation, see “Mounting C7189R1004 Wireless Indoor

Sensor” on page 70, and “Mounting C7189U1005 Wired

Indoor Sensor” on page 71. For wiring, see “Wiring guide —

Wired Indoor Sensors” on page 154.

Indoor Sensor Operation

Temperature Control

The thermostat can be set to respond to its internal

temperature sensor, or to an optional remote indoor sensor. If

multiple sensors are used, the thermostat will average the

temperature detected at each sensor.

Fig. 310.

Humidification control

If optional remote indoor sensors are installed, you can choose

which sensor you want to use for humidification control. You

can use a different sensor for dehumidification.

NOTE: Requires wireless indoor sensor.

Fig. 311.

Dehumidification control

If optional remote indoor sensors are installed, you can choose

which sensor you want to use for dehumidification control. For

example, you can use one sensor for humidification control,

and another for dehumidification.

NOTE: Requires wireless indoor sensor.

Fig. 312.

Wireless Indoor Sensor

The wireless indoor sensor senses temperature and humidity

in remote locations and communicates that information

wirelessly to the thermostat.

The indoor sensor can be used to do the following:

• Maintain a more consistent temperature throughout the

building by averaging temperatures. Temperatures from all

sensors, including the thermostat, are weighted equally.

• Relocate sensing location (thermostat is in a poor location).

• Relocate the thermostat (if you want to hide the thermostat).

• Humidify and dehumidify in separate spaces (for instance,

humidify on the main level, and dehumidify in the crawl

space).

You can connect up to 6 Wireless Indoor Sensors to the

thermostat. If you connect a Wired Indoor Sensor network to

the S1, S2, S3, or S4 terminals, you can connect up to 5

Wireless Indoor Sensors to the thermostat.

The indoor air sensor has a 1 year battery life.

Battery level indicators (when batteries are inserted)

• Good: Status light flashes green for 5 seconds.

• Low: Status light flashes red for 5 seconds. Use fresh

batteries.

Battery level indicators (during use)

• Good: Status light remains off.

• Low: Battery power will be depleted in about 2 months.

Thermostat displays Low Battery warning. Status light

remains off.

• Critical: Battery power will be depleted in about 2–3 weeks.

Status light flashes red.

Содержание THX9321 Prestige 2.0

































































































































































Результаты поиска

Содержание THX9321 Prestige 2.0

Отзывы:

Похожие инструкции для THX9321 Prestige 2.0

Бренды по названию

Популярные бренды

Honeywell THX9321 Prestige 2.0, Данные о продукции

Результаты поиска

Содержание THX9321 Prestige 2.0

Отзывы:

Похожие инструкции для THX9321 Prestige 2.0

Бренды по названию

Популярные бренды