Honeywell SmartDrive HVAC, Руководство по установке

Страница: 40 / 77

P
OWER CABLING
Honeywell
• 38
4
Figure 33.
9
If you use thick cables insert the cable insulators in between the terminals in
order to avoid contact between the cables.
10
Connect the cables stripped as shown in Figure 24.
• Connect the (phase) conductors of the supply, brake and motor cables
into their respective terminals (a).
• Form the rest of the cable shield of all cables into “pigtails” and make a
grounding connection as shown in Figure 34 (b) using the clamp from the
Accessories bag .
• NOTE : If you use several cables on one connector observe the position of
cable lugs on top of each other. See Figure 35 below.