Honeywell OW-CDX050 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 134

background image

R110

OneWireless Multinode User's Guide

5

6/08

Agency compliance information

This section contains agency compliance information for Honeywell’s OneWireless
Multinode. For additional details on compliance information, see also the

OneWireless

Multinode Agency Compliance Professional Installation Guide

.

Compliance statements and restrictions

This section contains the Federal Communications Commission (FCC), Industry Canada
(IC) and Radio Frequency compliance statements for the OneWireless Multinode device.

FCC compliance statements

•

This device complies with Part 15 of FCC Rules and Regulations. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.

•

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radiofrequency energy
and, if not installed and used in accordance with these instructions, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.

•

Intentional or unintentional changes or modifications must not be made to the
Multinode unless under the express consent of the party responsible for compliance.
Any such modifications could void the user’s authority to operate the equipment and
will void the manufacturer’s warranty.

IC compliance statements

•

To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropic radiated power (EIRP) is not more
than that permitted for successful communication.

•

Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.

•

This Class A digital apparatus complies with Canadian ICES-003.

•

French: Cet appareil numérique de la classe A est conforme à la norme NMB-

003 du Canada.

«
...
15
16
17
18
19
...
»

Содержание OW-CDX050







































































































































Отзывы:

Нет отзывов

Похожие инструкции для OW-CDX050

Бренд: Etross Страницы: 50

Бренд: B&B Страницы: 2

IGW1111-3IN1-DB

Бренд: 3onedata Страницы: 3

SNAPconnect E12

Бренд: Synapse Страницы: 35

Бренд: Artila Страницы: 22

Бренд: Fastus Страницы: 2

Бренд: Hitachi Страницы: 18

Бренд: Hitachi Страницы: 56

Бренд: Hitachi Страницы: 50

Бренд: WePresent Страницы: 39

Бренд: SonicWALL Страницы: 7

Бренд: San Telequip Страницы: 19

Gateway 2070 Series

Бренд: 2Wire Страницы: 4

Бренд: AMX Страницы: 2

Ethernet Gateway Version 3

Бренд: Packet Power Страницы: 11

Бренд: ZyXEL Communications Страницы: 68

Бренд: B+B SmartWorx Страницы: 146

Бренд: Vlinx Страницы: 71

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды