Honeywell OW-CDX050, Руководство пользователя

Страница: 58 / 134

Configuration
Wireless Access Point Configuration
46 OneWireless Multinode User's Guide R110
6/08
System Configuration - WAN screen
The System Configuration - WAN screen allows you to specify static IP Address
information that will be used to manage this network if you do not use the DHCP server
to obtain an IP address.
Step Action
1
Click on the System Configuration - WAN at the left of the screen to call up
the WAN screen.
2
Select WAN Link Auto from the drop down selections.
Note: When interfacing with Cisco switches, this setting may need to be set
to another value other than Auto.
Also see NOTE 1 below this procedure.
3
Click on the Specify a static IP address radio button.
4
Enter a valid IP Address for the WSG such as 192.168.254.254, or other
address as specified for the site.
Note that if the IP Address is changed and then applied, the PC network card
settings must be changed to log back in to the multinode.
5
Enter the Subnet Mask such as 255.255.255.0, or other subnet as specified
for the site.
6
Enter the Default Gateway such as 192.163.254.1, or other address as
specified for the site.
7
Leave DNS1 and DNS 2 fields blank unless a value is specified for the site.
8
Record the addresses entered in steps 4 through 7. They will be needed to
perform other tasks.
9
When you have completed entries for all fields on the screen, click Apply .
10
Log back into the multinode:
•
Open Internet Explorer and type in https:// and the new IP address from
step 4.
•
Type the username and password.