Honeywell OW-CDX050, Руководство пользователя, Страница: 102 / 134

Wireless Mesh Configuration
Setting up wireless networks
90 OneWireless Multinode User's Guide R110
6/08
Point-to-Multipoint network
A point-to-multipoint network allows three or more multinode access points to
communicate wirelessly between 3 or more locations. Figure 12 shows an example of
this network type. Multinode 1 is the single access point for communication with the
other mesh nodes (Mesh nodes 2, 3, …
n ) in the network. For the mesh nodes to be
linked and communicating properly, they must be configured with compatible options in
their Wireless Mesh setup screens. For example, all mesh nodes must be set with the
same channel number.
When setting up this type of network, Mesh node 1 must contain the BSSIDs for all other
mesh nodes in the network, while Mesh nodes 2, 3, …
n need to contain only Mesh node
1's BSSID. Table 15 and Table 16 list the option settings for creating the point-to-
multipoint network as shown in Figure 12. Use the settings in these tables if you want to
set up this type of network. The procedure
to set up a wireless mesh begins on page 86.
NOTE: To set up bridging for Mesh network communications, use the settings for Auto
Mesh in Table 15.
Figure 12 Point-to-multipoint network example