Performance Series IP Camera Software Configuration Guide
48
Date and Time
Figure 5-32 Date and Time Configuration Interface
Table 5-22 Date and Time Configurations
Parameter
Function
Date Format
Select a date format from the drop-down list.
Time Format
Select a time format, either
24-hour
or
12-hour
.
Time Zone
Select the time zone for the camera.
Current Time
Set it to set the system’s time. Click
Save
to activate this time.
Sync PC
Click to sync the camera’s time with your PC’s time.
DST
Set when Daylight Saving Time begins and ends. Select
Date
or
Week
.
NTP
Click to enable synchronization with a Network Time Protocol (NTP) server.
NTP Server
Configure the NTP server.
Port
Configure the port for the NTP server.
Update Period
Configure synchronization periods between the camera and the NTP server.
Account Setup
The system supports up to 15 characters for the user name or user group name. You can use letters,
numbers, and the underscore character ( _ ) for the user or group name.
You can configure up to 18 users and eight groups (default factory settings). The factory default setup
includes two user levels:
user
and
admin
(case-sensitive).
When configuring groups, you can configure the rights of those groups. You can also set rights for
individuals within groups.
Note
User management adopts group/user modes. The user name and the group
name should be unique. A user can be included in only one group at a time.
