Configuring Camera Settings
31
Configuring Network Settings
TCP/IP
Figure 5-9 TCP/IP Interface
Table 5-7 TCP/IP Configuration
Parameter
Function
Host Name
Configure to set the current host camera’s name. Maximum 32
characters.
Ethernet Card
Select an Ethernet port. The default is
wire LAN.
Note
If you modify these settings, you will have to reboot your camera
to activate the new setup.
Mode
Select
Static
or
DHCP
mode.
The
IP Address
,
Subnet mask
, and
Default Gateway
fields are
unavailable when you select
DHCP
mode to automatically search for
the IP address.
If
Static
mode is selected, you must manually assign the
IP Address
,
Subnet mask
, and
Default Gateway
.
If
DHCP
mode is selected, the
IP Address
,
Subnet mask
, and
Default
Gateway
are assigned automatically.
Note IP Address
,
Subnet mask
,
Default Gateway
, and
DHCP
are read-
only when
PPPoE
is enabled.
MAC Address
Displays the MAC address.
IP Version
Select the IP version you are using: IPv4 or IPv6.
IP Address
If
Static
mode is selected, type values for the
IP Address
,
Subnet mask
,
and
Default Gateway
.
Preferred DNS Server
Enter the preferred DNS server IP address.