Performance Series IP Camera Software Configuration Guide
34
ONVIF
ONVIF (Open Network Video Interface Forum) is a global open standard for the interface of IP-based
security products. It covers network video mode, interface, data type, and data interaction mode. The
ONVIF specification aims at interoperability of network video products regardless of manufacturer.
The ONVIF setting is enabled by default.
•
To enable ONVIF, on the
ONVIF
tab, click
Enable
.
•
To disable ONVIF, on the
ONVIF
tab, click
Disable
.
PPPoE
Figure 5-12 PPPoE Configuration Interface
1.
To enable PPPoE, select the
Enable
checkbox and enter the PPPoE user name and password that
you received from your Internet service provider (ISP).
2.
Click
Save
to save the current setup, and then reboot the camera to activate this new setup. The
camera connects to the Internet via PPPoE after rebooting.
You can access the web client through the DDNS domain name (see
on page
). To access the
camera using the HonView Touch app, P2P must be enabled (see
Note
When
PPPoE
is enabled, disable
UPnP
so that it does not interfere with
PPPoE
.