Getting Started
9
Upgrading Your Device’s Firmware
Before you begin using your camera, make sure you have the latest firmware installed. You can upgrade
a single device or multiple devices at the same time.
To upgrade a single device:
1.
From the list of devices in ConfigTool, click the device that you want to upgrade.
2.
Click
Login
, type the login user name and password for the device (the default user name is
admin
and the default password is
1234
), and then click
OK
.
3.
On the
Config
screen, click the
Upgrade
tab.
4.
Click
OpenFile
, navigate to the directory that contains the firmware file, and then click
Upgrade
.
Figure 2-3 Upgrade Screen
When the upgrade is complete, the device will reboot. While the device is rebooting, the message
"Device is offline: [
device IP address
]" appears.
To upgrade multiple devices simultaneously
1.
In ConfigTool, click
Batch Mode
.
Figure 2-4 Select Batch Mode
2.
From the list of devices, click all of the devices that you want to upgrade, and then click
Start
.
