Configuring Camera Settings
39
3.
Click
Details
, and then click to select
Internet Gateway Device Discovery and Control client
and
UPnP User Interface
.
4.
Click
OK
to begin the installation.
SNMP
You can configure cameras using SNMP (Simple Network Management Protcol).
Figure 5-18 SNMP Configuration Interface
Table 5-13 SNMP Configurations
Parameter
Function
SNMP Version
When
SNMP v1
is selected, the device can only process SNMP v1
information.
When
SNMP v2
is selected, the device can only process SNMP v2
information.
When
SNMP v3
is selected, you can set user name, password and
authentication type.
The server needs to set the corresponding management system account
when you want to access the device. For security reasons, the SNMP v1 and
SNMP v2 are both null.
SNMP Port
This is the listening port of the proxy applications in the device. The default
value is 161. The value ranges from 1 to 65535.
Read Community
The community string will read all the objects the SNMP supported in the
specified name. The default setup is public.
Write Community
The community string will read/write/access all the objects the SNMP
supported in the specified name. The default setup is write.
Trap Address
The destination address of the trap information from the proxy program of
the device.
