Honeywell GasLab Q2, Руководство пользователя, Страница: 74 / 266

GASLAB Q2 AFTER DELIVERY AND AT THE PLACE OF USE
Information for general use
Rev. M / 73023639 74 GasLab Q2
Ethernet
Cable type refer to

5.4.2 Cables (power supply / communication) length 100m
≙
328ft.
The connection is made using the terminals designated TB3-1 to TB3-4 in the Q2 connection box.
The core colors depend on the standard used, normally EIA/TIA 568B. The twisted pairs must not be
untwisted or regrouped. The polarity of the cores within the core pair is unimportant and the core
pairs can even be swapped.
Core
pair Plug
(pins)
Color depending on standard
Remark
Terminal
inside
Q2
EIA/TIA 568 B EIA/TIA
568 A IEC REA DIN 47.100
1 4 / 5 blue + white/blue blue +
white white/+
blue white+
blue white+
brown
2 3 / 6 white/green
+ green white +
orange red+
orange turquoise
violet green+
yellow
Only core
pairs 2 and 3
are required
TB3-3
TB3-4
3 1 / 2 white/orange
+ orange white +
green black+
grey white+
orange grey +
pink TB3-1
TB3-2
4 7 / 8 white/brown +
brown white +
brown
brown tu
violet blue +
red
The following drawing is only designed to illustrate the screening using an example.
Figure 5.7: Sample LAN/Ethernet connection (diagram)
Additional to the wiring, settings must be made before this interface can be used.
On the Q2
 7.3.14
System display I/O (basic network settings / Inputs /Outputs)
Or with enSuite
 8.4.5
Changing the IP address basic network and I/O settings ”.