Honeywell ADEMCO VISTA-120, Инструкция по установке и настройке

Страница: 62 / 114

VISTA-120 Installation and Setup Guide
5-8
1*07
Check or TRBL Display
0 = CHECK
1 = TRBL
Select whether the system should display TRBL or CHECK for trouble
conditions.
1*08
Suppress Use of Armed LED on
Keypads
0 = disable
1 = enable
If enabled, the system suppresses the armed LED when the system is in the
armed state. This is for countries where the Red is only for indicating alarm.
1*09
Suppress Keypad Arming Status
Indications When System is Armed
0 = disable
1 = enable
If enabled, the system suppresses all arming status indications when the
system is armed, but alarms, troubles, etc. will be displayed.
NOTE: If enabled, no prompts are displayed for disarming, including prompts
for global-disarming. Also, voice annunciations are suppressed on all devices
(ex. 5804BDV). The arming status is NOT suppressed on any Master
Consoles.
1*10
First to Alarm Display Lock
0 = scroll alarms
1 = lock display
If lock display is selected, the system displays of first fire alarm and requires
the user to press the [*] key for a display of each additional fire alarm.
Otherwise, the system automatically scrolls all fire alarms.
1*11
Common Area 1 Partition
Enter 1-8
0 = none
Enter the common area 1 partition.
1*12
Affects Common Area 1 (partition-
specific)
0 = disable
1 = enable
If enabled, causes common area 1 to disarm when this partition disarms.
NOTE: This partition must be armed before common area 1 can be armed.
1*13
Arms Common Area 1 (partition-
specific)
0 = disable
1 = enable
If enabled, arming this partition causes the system to attempt to arm common
area 1 automatically. To enable this field, field 1*12 must also be enabled
(partition-specific).
NOTE: Common area 1 cannot be armed unless all partitions programmed for
“affect” (field 1*12) are already armed.
1*14
Common Area 2 Partition
Enter 1-8
0 = none
Enter the common area 2 partition.
1*15
Affects Common Area 2 (partition-
specific)
0 = disable
1 = enable
If enabled, causes common area 2 to disarm when this partition disarms.
NOTE: This partition must be armed before common area 2 can be armed.
1*16
Arms Common Area 2 (partition-
specific)
0 = disable
1 = enable
If enabled, arming this partition causes the system to attempt to arm common
area 2 automatically. To enable this field, field 1*15 must also be enabled
(partition-specific).
NOTE: Common area 2 cannot be armed unless all partitions programmed for
“affect” (field 1*15) are already armed.
1*17
Common Area 3 Partition
Enter 1-8
0 = none
Enter the common area 3 partition.
1*18
Affects Common Area 3 (partition-
specific)
0 = disable
1 = enable
If enabled, causes common area 3 to disarm when this partition disarms.
NOTE: This partition must be armed before common area 3 can be armed.
1*19
Arms Common Area 3 (partition-
specific)
0 = disable
1 = enable
If enabled, arming this partition causes the system to attempt to arm common
area 3 automatically. To enable this field, field 1*18 must also be enabled
(partition-specific).
NOTE: Common area 3 cannot be armed unless all partitions programmed for
“affect” (field 1*18) are already armed.
Auto Bypass Logic
At the end of the exit delay, if a door is left open or an interior zone is faulted, the system starts the entry delay period,
and sounds the bell/siren(s) and keypad sounders for the duration of entry delay. This gives the user time to re-enter the
premises and disarm the system before auto bypass occurs. If field *07 is enabled, the faulted zone(s) are auto bypassed