Honeywell ADEMCO VISTA-120, Инструкция по установке и настройке

Страница: 11 / 114

2-1
S E C T I O N 2
Partitioning and Panel Linking
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Theory of Partitioning
This system provides the ability to arm and disarm up to 8 different areas, each as if it had its own control. These areas
are called partitions. Partitions are used when the user desires to disarm certain areas while leaving other areas armed,
or to limit access to certain areas to specific individuals. Each user of the system can be assigned to operate any or all
partitions, and can be given a different authority level in each.
First, you must determine how many partitions are required (1-8). This must be done before anything can be assigned to
those partitions.
Keypads
Each keypad must be given a unique "address" and assigned to one partition (can also be assigned to Partition 9 if
"Master" keypad operation is desired--see
Master Keypad Setup and Operation later in this section).
Zones
Each zone must be assigned to one partition. The zones assigned to a partition will be displayed on that partition's
keypad(s).
Users
Each user can be assigned to one or more partitions. If a user is to operate more than one partition and would like to
arm/disarm all or some of those partitions with a single command, the user must be enabled for "Global Arming" for
those partitions (when entering user codes).
A user with access to more than one partition (multiple access) can "log on" to one partition from another partition's
keypad, provided that program field 2*18: ENABLE GOTO is enabled for each partition you want to log on to from
another.
Up to 3 partitions can be selected as "common area" partitions, and other partitions can affect these partitions by
causing arming/disarming of these partitions to be automated (see
Common Area Logic , later in this section).
Setting Up a Partitioned System
The basic steps to setting up a partitioned system are described below. If you need more information on how to program
the prescribed options, see
SECTION 4: Programming , as well as each corresponding section's programming procedure.
1. Determine how many partitions the system will consist of (programmed in field 2*00).
2. Assign keypads to partitions (#93 Device Programming mode).
3. Assign zones to partitions (#93 Zone Programming mode).
4. Confirm zones are displayed at the keypad(s) assigned to those partitions.
5. Assign users to partitions.
6. Enable the GOTO feature (program field 2*18) for each partition a multiple-access user can "log on" to (alpha
keypad only).
7. Program Partition-Specific fields (see SECTION 5: Data Field Descriptions ).
Common Area Logic
When an installation consists of one or more partitions shared by users of other partitions in a building, those shared
partitions may be assigned as the "common area" partitions for the system (program fields 1*11, 1*14, 1*17). An
example of this might be in a medical building where there are two doctor's offices and a common entrance area (see
example that follows explanation).
This option employs logic for automatic arming and disarming of the common area. Programming fields affect the way
the common area will react relative to the status of other partitions. They are: 1*12, 1*15, 1*18 (Affects Common Area)
and 1*13, 1*16, 1*19 (Arms Area).