Honeywell ADEMCO VISTA-120, Инструкция по установке и настройке

Страница: 50 / 114

VISTA-120 Installation and Setup Guide
4-6
Provides a delayed alarm (using the programmed entry
delay time) if an entry/exit zone is faulted first.
Otherwise, it produces an instant alarm. It is active
when the system is armed AWAY or MAXIMUM, but
the MAXIMUM mode eliminates the entry delay.
Interior Follower zone is automatically bypassed when
the panel is armed in the STAY or INSTANT mode.
Assign this zone type to a zone covering an area such as
a foyer, lobby, or hallway through which one must pass
upon entry or exit (to and from the keypad).
Type 05: Trouble by Day/Alarm by Night
Provides an instant alarm if the zone is faulted and the
system is armed in the AWAY, STAY, INSTANT, or
MAXIMUM mode. During the disarmed state (day), the
system annunciates a latched trouble sounding from
the keypad (and a central station report, if desired).
There are programming options to prohibit bypass of
this zone type except by installer and to prohibit
restoration of the system (or partition) to the disarmed,
ready to arm state subsequent to a trouble or alarm
condition related to this zone type, except by the
installer.
Assign this zone type to a zone that contains a foil-
protected door or window (such as in a store), or to a
zone covering a sensitive area such as a stock room or
drug supply room. It can also be used on a zone in an
area where immediate notification of an entry is
desired.
Type 06: 24-Hour Silent Alarm
Sends a report to the central station but provides no
keypad display or sounding. Assign this zone type to a
zone containing an Emergency button.
Type 07: 24-Hour Audible Alarm
Sends a report to the central station and provides an
alarm sound at the keypad and an audible external
alarm. Assign this zone type to a zone containing an
Emergency button.
Type 08: 24-Hour Auxiliary Alarm
Sends a report to central station and provides an alarm
sound at the keypad only.
(No bell/siren output is
provided.) Assign this zone type to a zone an
Emergency button or one containing monitoring devices
such as water sensors or temperature sensors.
Type 09: Supervised Fire. (No Verification)
Provides a fire alarm on a short circuit and a trouble
condition on open circuit. A fire alarm produces a
pulsing of the bell/siren output. A zone of this type is
always active and cannot be bypassed.
This zone type
can be assigned to any wired zone except zone 9,
and can be assigned to certain wireless system
zones.
Type 10: Interior with Delay.
Provides entry and exit delays (using the programmed
entry and exit delay times) when armed in the AWAY
mode. Provides only exit delay when armed in the
MAXIMUM mode (no entry delay). Delay begins
whenever sensors in this zone are violated, regardless
of whether or not an entry/exit delay zone was tripped
first.
The Interior with Delay zone is automatically bypassed
when the panel is armed in the STAY or INSTANT
mode.
Assign this zone type to a zone covering an area such as
a foyer, lobby, or hallway through which one must pass
upon entry or exit (to and from the keypad).
Type 14: PLM Supervision
Provides supervision of remote Panel Link Modules. If
the communication between the local PLM and a
remote PLM fails, a trouble message is produced for the
PLM zone.
Type 19: 24 Hour Trouble
An open or short on a zone with this zone type causes a
trouble response. No external alarm sounders are
activated.
Type 20: Arm-STAY*
Causes the system to arm in the STAY mode when the
zone is activated.
Type 21: Arm-AWAY*
Causes the system to arm in the AWAY mode when the
zone is activated.
Type 22: Disarm*
Causes the system to disarm when the zone is
activated.
Type 23: No Alarm Response
Used on a zone when an output relay action is desired,
but with no accompanying alarm (e.g., for lobby door
access).
Type 27: Access Point
Assign this zone type to an input device (wired zone,
wireless zone, keypad, access control relay, etc.) that
controls an access entry point (e.g., a door). The access
point entry relay can be assigned to an access control
relay (controlled by the VISTA-120), ECP relay (4204),
or to the access control system independent of the
VISTA-120.
Type 28: PassPoint Main Logic Board (MLB)
Supervision
Used to supervise the MLB. If communication between
the MLB and the VISTA Gateway Module (PTVGM)
fails, a trouble condition is annunciated for the zone.
Also, if the communication fails, all access control
system (ACS) input zones also display a “CHECK.”
* Only use for 5800 series transmitters and polling
loop RPMs connected to keyswitches.
Type 29: Momentary Exit