Honeywell ADEMCO VISTA-120, Инструкция по установке и настройке

Страница: 102 / 114

VISTA-120 Installation and Setup Guide
B-2
Code Definition Code Definition
621 Event Log Reset 625 Time/Date Reset
622 Event Log 50% Full 631 Exception Schedule Change
623 Event Log 90% Full 632 Access Schedule Change
624 Event Log Overflow
Table of Event Log Codes
Event Alpha Event Alpha
Access Control Test Mode Start BGN ACS TEST Door Forced Open Restore DRFO RST
Access Control Test Mode End END ACS TEST Door Prop Open DR OPEN
Access Denied NO ENTRY Door Prop Open Restore DRPO RST
Access Granted ENTERED Duress Access Grant DUR ACCS
Access Point Bypass ACPT BYP Duress Alarm DURESS
Access Point DSM Shunt DSM SHNT Duress Egress Grant DUR EXIT
Access Point DSM Trouble DSM TRBL Duress Restore DURE RST
Access Point DSM Trouble Restore DSM RST Egress Denied NO EXIT
Access Point Failure ACS PNT Egress Granted EXITED
Access Point Failure Restore ACPT RST Entry to Test Mode TEST ENTRY
Access Point Relay Supervision Fail ACPT RLY Event Log LOG OVERFLOW
Access Point Relay Supervision Restore RLY RST Event Log Cleared LOG CLEARED
Access Point RTE Shunt RTE SHUNT Event Log at 50% Capacity LOG 50% FULL
Access Point RTE Trouble RTE TRBL Event Log at 90% Capacity LOG 90% FULL
Access Point RTE Trouble Restore RTE RST Exit Error Occurred EXIT ERR
Access Point Unbypass ACPT UNB Exit From Program Mode PROGRAM EXIT
Access Point DSM Unshunt DSM UNSH Exit From Test Mode TEST EXIT
Access Point RTE Unshunt RTE UNSH Failure to Communicate FAIL TO COMM
AC Loss at a Module ACLO MOD Fire Alarm FIRE
AC Loss at a Module Restore ACRST MOD Fire Alarm Restore FIRE RST
AC Power Fail AC LOSS Fire Zone Trouble FIRE TRB
AC Power Restore AC RESTORE Fire Zone Trouble Restore FRTR RST
ACS Module Reset RES MOD Intrusion Verify INTRSN VERIF
ACS Program Entry ACS PROG Low Battery at a Module LBAT MOD
ACS Program Exit ACS PRGX Low Battery at a Module Restore LBAT RST
ACS Reader Disable RDR DISA Non-Burglar Alarm AUXILARY
ACS Reader Enable RDR ENAB Non-Burglar Restart AUX RST
ACS Relay/Trigger Disable RLY DISA Panel is Calling Download Computer CALL BACK
ACS Relay/Trigger Enable RLY ENAB Panic Alarm PANIC
ACS Threat Change THRT CHG Panic Alarm Restore PNC RST
ACS Zone Alarm ZN ALARM Poll Loop Restore EXP RST
ACS Zone Alarm Restore ZNAL RST Polling Loop RPM Restore RPM RST
ACS Zone Change ACZN CHG Poll Loop Short EXP SHRT
ACS Zone Shunt ZN SHUNT Poll Loop Smoke Det. Tested† TESTED
ACS Zone Unshunt ZN UNSHT Poll Loop Smoke Det. Not Tested† UNTESTED
Auto Disarm DISARM-AUTO Poll Loop Smoke Det. Test Failed† FAILED
Backup Battery Test Failed BAT TST FAIL Polling Loop Short EXP TRBL
Burglary Alarm BURGLARY Polling Loop Tamper EXP TMPR
Burglary Alarm Cancel CANCEL Printer Failure PRINTER FAIL
Burglary Alarm Restore BURG RST Printer Restore PRINTER RST
Comm. Failure from MLB to Module COMM MOD Programmed Access Sched Change ACC SKED CHG
Comm. from MLB to Module Rest COMM RST Program Change PROG CHANGE
Communication Restore COMM RESTORE Program Mode Entered PROGRAM ENTRY
Dialler Restored to Service DIALLER RST Programmed Schedule was Changed SCHEDULE CHANGE
Dialler Shutdown DIALLER SHUT
Real-Time Clock was Set TIME SET
Disarmed DISARMED
RF Expander Module Fail RF EXPND