Hologic R2 DM, Руководство пользователя

Страница: 47 / 106

3.8. Viewing Study Information
After the system scans the last film for a study, it retains the patient flash image
from that film as part of the study information.
Note the following:
•
To prevent errors, always compare the patient information with the information
appearing on the patient flash.
•
The image thumbnails always appear in film scanning order. Once the films have been
scanned, you cannot change the order.
•
The thumbnails should always appear in anatomic orientation (e.g., with the RCC
nipple pointing left). If they are not, reorient the images as described in ‘
3.10.
Correcting Scanned Images ’.
•
For ImageChecker users, CAD marks do not appear on the touch-screen monitor. The
CAD marks appear only on the output devices (display units, review workstations,
printouts, etc.).
The following table shows the Status conditions that the system can display for a case.
Case Status Message Meaning
Processing The system is scanning and processing the selected case.
Needs Verification The system requires you to review and ‘verify’ the case
images before it will send the study results to a display
device or archive.
Transmitting The system is transmitting the scanned images to a
display device or archive.
Completed The system has finished transmitting the study.
Failed The system was unable to complete the processing or
study transfer and has issued an alert.
If one or more images in the study could not be processed for any reason, a yellow ‘X’
appears on the image. However, all scanned images will still be sent to the PACS if
your system is configured for archiving. See ‘
Part 4: Alerts ’ for more information on
alert messages.
R2 DM User Manual – PN MAN-01044 Rev 001 39