Hologic R2 DM, Руководство пользователя

Страница: 42 / 106

Part 3: Studies
3.5. Scanning with the Any Protocol
Use the Any protocol to scan cases that do not conform to an existing scanning
protocol, for example, if the case has missing films, extra films, or views not included
in any existing scanning protocol.
The Any protocol contains no predefined views. This allows you to scan any number
of films (up to 24) with any type of view and later identify the views manually once
the case has been scanned.
A neat and ordered stack can save time spent adjusting the image orientation after
scanning. Keep the following in mind:
•
Remove films from the stack that would normally be discarded rather than saved
(for example, technical retakes).
•
Orienting the films correctly in the stack saves time adjusting the orientation later
via the Image Correction screen.
X
To scan with the Any protocol
1
Prepare the case to be scanned as described in ‘ 3.2. Preparing Cases to Be Scanned ’.
2
Place the separator sheet on top of the stack for each case.
You can arrange the films in any order, although you may wish to use a sequence
defined by your site (for example, the four standard views first, followed by additional
or equivalent views). As needed, turn films a quarter turn to match the orientation
shown on the separator sheet.
If you load films in a random order as shown below, you will have to reorient the
images later via the Image Correction screen.
3
Load the stack into the input tray. Insert the stack with:
•
The arrow on the top separator sheet pointing into the scanner.
•
The leading edges of the films and separator sheets aligned flush.
34 R2 DM User Manual – PN MAN-01044 Rev 001