Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
258
Vehicle Care
Warning (Continued)
was new, it can lose air over time.
Check the inflation pressure
regularly.
After installing the spare tyre on
the vehicle, stop as soon as
possible to check the inflation
pressure is correct. Have the flat
tyre repaired or replaced and
installed back on the vehicle as
soon as possible.
1. Park on a hard, level surface,
in a safe location.
2. Apply the park brake firmly.
3. Place the shift lever in
position
P
.
4. Switch the hazard warning
flashers on.
5. Turn off the engine and remove
the key.
6. Chock the wheel diagonally
opposite the flat tyre with a
suitable solid object.
Note
Do not change more than one wheel
at one time.
7. Remove the tools. See
8. Rotate the spare wheel winch
access cap anticlockwise to
remove. Lift the carpet flap to
access the winch slot.
9. Assemble the wheel wrench,
jack handle extensions and the
jack handle using a
screwdriver.
10. Insert the chiselled end of the
jack handle through the hole
and into the slot.
11. Rotate the wheel wrench
anticlockwise to lower the
spare tyre to the ground.
12. Continue to rotate the wheel
wrench until the spare tyre can
be pulled out from under the
vehicle.