Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
Driving and Operating
207
{
Warning
Poor illumination conditions will
prejudice the camera
identification of vehicles ahead.
Motorcycles may not be detected
by the camera when its is dark
enough outside.
Collision Alert
Cluster Alert
Reflected LED Alert
When your vehicle approaches
another detected vehicle too rapidly,
the red FCA display will flash and
sound several high-pitched beeps
from the front. When this Collision
Alert occurs, the brake system may
prepare for driver braking to occur
more rapidly which can cause a
brief, mild deceleration. Continue to
apply the brake pedal as needed.
Cruise control may be disengaged
when the Collision Alert occurs.
Press
[
on the steering wheel to
adjust the alert sensi
tivity
. Each
press cycles the alert sensi
tivity
through three settings: Far, Medium,
Near or Off.
When pressed, the current alert
sensi
tivity
setting displays briefly on
the instrument cluster. The alert
sensi
tivity
setting will be maintained
until it is changed.
Note
Consider traffic and weather
conditions when selecting the
following alert sensi
tivity
. The range
of selectable alert sensi
tivity
may
not be appropriate for all drivers and
driving conditions.
Tailgating Alert
The yellow Collision Alert display
will stay continuously illuminated
when following a detected vehicle
ahead much too closely.
Selecting the Alert Timing
The Collision Alert control is on the
steering wheel. Press
[
to set the
FCA timing to far, medium, near,