Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
20
Keys, Doors, and Windows
.
The malfunction indicator lamp
is on.
.
The engine coolant temperature
is too high.
.
The oil pressure is low.
.
Two remote vehicle starts, or a
single remote start with an
extension, have already
been used.
.
The vehicle is not in P (Park).
Remote Control
Battery Replacement
As soon as the range of the remote
control reduces, replace the battery:
Replace battery in remote key
is
also displayed on the instrument
panel when the battery requires
replacing.
Use CR2032 (or equivalent) battery.
1. Open the cover.
2. Remove the used battery.
3. Install the new battery.
Place the negative side (-)
down towards the base.
4. Close the cover.
5. Check the key operation.
Note
.
Batteries do not belong in
household waste. Dispose of at
an appropriate recycling
collection point.
.
Avoid dropping the transmitter.
.
Do not place heavy objects on
the transmitter.
.
Keep the transmitter away from
water and direct sunlight.
.
If the transmitter gets wet, wipe
it with a soft cloth.
Caution
Avoid touching the flat surfaces of
the battery, the circuit board and
other components inside the
remote control with bare fingers.
Handling will shorten battery life.