Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
Driving and Operating
203
.
Noise or vibration from the brake
system may be noticeable when
the system is in operation.
Caution
Use only when descending steep
gradients while driving off-road.
Do not use when driving on
normal road surfaces.
Unnecessary usage of the DCS,
such as while driving on normal
roads, may damage the brake
system and the ESC function.
Activation
While travelling at speeds below
50 km/h:
.
Press
5
.
5
illuminates green on the
instrument panel.
During operation,
5
flashes.
Note
.
Pressing the accelerator or
brake pedals while DCS is
activated, will adjust the desired
descent speed.
If pressed, DCS operation will
stop until the accelerator or
brake pedals are released.
5
stops flashing.
.
If the DCS is activated and the
vehicle speed exceeds 30 km/h,
5
extinguishes and the system
remains in standby mode.
When the vehicle speed drops
below approximately 30 km/h,
5
illuminates and DCS is
activated.
.
When in standby mode and the
vehicle speed exceeds 50 km/h,
DCS deactivates.
.
The message Reduce Speed for
Hill Descent Control may display
when DCS is activated and
vehicle speed exceeds 30 km/h.
Deactivation
While travelling at speeds below
50 km/h:
.
Press
5
5
extinguishes.
System Protection
When operated continuously for
prolonged periods of time,
temperatures may increase within
the brake system:
.
DCS may enter a protection
mode, gradually releasing the
brakes, and temporarily
disabling DCS.
.
5
will extinguish.
.
Traction Control Off may display
on the DIC.