Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
264
Vehicle Care
8. Connect the black lead to the
negative terminal of the
booster battery (3).
9. Connect the other end of the
black lead to a vehicle
grounding point, such as the
engine block or an engine
mounting bolt (4).
Connect as far away from the
discharged battery as possible
(at least 60 cm).
Note
Route the leads so that they cannot
catch on rotating parts within the
engine compartment.
10. Start the engine of the vehicle
providing the jump start and
allow to idle for at least
5 minutes.
11. Start the engine of the vehicle
with the flat battery.
Start attempts should be made
for no longer than 15 seconds
at an interval of 1 minute.
12. Allow both engines to idle for
approximately 3 minutes with
the leads connected.
13. Switch on the headlamps and
the heated rear window of the
vehicle that received the jump
start.
14. Leave the engines running
while removing the BLACK
negative jumper lead first,
followed by the RED positive
jumper lead.
Note
While removing each clamp, do not
touch any other metal while the
other end remains attached.
Towing
Towing the Vehicle
A flat-bed tow truck is the best
method of towing the vehicle to
avoid damage.
{
Warning
No passenger should remain in
the vehicle being towed.
Proper lifting or towing equipment is
necessary when lifting or towing the
vehicle to prevent damage. State
and local laws must be followed.