Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
Driving and Operating
205
4. Take your foot off the
accelerator pedal.
Increasing Set Speed
.
Push the switch up to
RES/+
and hold it or briefly push to
RES/+
repeatedly.
The vehicle will accelerate.
.
Alternatively accelerate to the
desired speed and store by
pushing the switch down to
SET/-
.
Note
Vehicle speed can be increased by
depressing the accelerator pedal.
When the accelerator pedal is
released, the previously stored
speed is resumed.
Decreasing Set Speed
1. Push the switch down to
SET/-
and hold it or briefly push to
SET/-
repeatedly.
The vehicle will decelerate.
2. Release the switch at the
desired speed.
Deactivation
.
Press
CANCEL
.
I
illuminates white.
Alternatively, do one of the
following:
.
Reduce vehicle speed below
approximately 20 km/h.
.
Press the brake pedal.
.
The TCS or the ESC operates.
Resume Stored Speed
When the cruise control is on and
speed is above 20 km/h:
.
Push the lever up to
RES/+
.
The most recently set speed will
automatically resume.
I
illuminates green.
Switching Off
.
Press
ON OFF
.
I
extinguishes.
The stored speed is deleted.
Note
Switching the ignition off also
deletes the stored speed.