Hoffrichter TRENDvent Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 104

Hoffrichter TRENDvent Скачать руководство пользователя страница 42

42

Commissioning

Power failure and thus the switch to the internal battery is indicated by an

alarm sound, as well as by the message “Battery Operation” (see Fig. 10). In
addition, the power LED will glow red and the alarm button will glow orange.

To switch the alarm off, press the alarm button. The alarm sound is switched

off, the message “Battery Operation” is hidden, and the power LED goes out.
When the power supply returns, the device is supplied with power from
the mains supply and the internal battery is charged and the power LED
is lit green again.

OPERATION WITH EXTERNAL BATTERY

Only the HOFFRICHTER AKKUPACK uni BASE may be used for the
external power supply. Before initial commissioning, you must read
the user’s manual for AKKUPACK uni BASE.

The AKKUPACK uni BASE enables the device to be operated indepen-

dently of the mains power supply. The battery pack is optionally available
as an accessory.

To supply the battery pack with power, use the power cable and the power

supply unit of the ventilator. If the battery pack is connected to the venti-
lator, the power LED lights green.

At full capacity and factory settings, the AKKUPACK uni BASE enables

TRENDvent to operate for up to 10 hours. Using AKKUPACK uni BASE

together with AKKUPACK uni PLUS doubles operation time to up to 20 hours.
For further information on connecting and handling the device, please refer
to the respective user’s manual.

50

40

30

20

10

0

Fig. 10: M

essage “Battery Operation”

Fig. 11: AKKUPACK uni BASE (right)

AKKUPACK uni PLUS (left)

«
...
40
41
42
43
44
...
»

Содержание TRENDvent









































































































Отзывы:

Нет отзывов