Hobbico Awarf Series, Руководство пользователя

Страница: 27 / 40

Engine shut-off
Decreasing throttle movement
❑
11. If the throttle control rod moves too far it will
bend slightly and the servo will make a noise of some
type. This will drain the receiver battery. To reduce
the movement of the throttle control rod, move the
pushrod connector closer to the center of the servo
horn.
Increase throttle movement
❑
12. To increase the movement of the throttle
control rod, move the pushrod connector on the
throttle arm closer to the mounting screw.
The carburetor
should be completely
closed.
The throttle servo
horn should be 45Þ
to the rear.
To stop the engine,
move the throttle
stick back and the
throttle trim back.
The carburetor
should be open only
1/16" (1.5mm).
27
45°