![background image](http://html.mh-extra.com/html/hitachi/mpegcam-mp-eg10w/mpegcam-mp-eg10w_instruction-manual_140926027.webp)
E73
______Chapter 4
Using Media Navigation (Playback)
Switching Thumbnail Display On or Off
You can switch the thumbnail display on and off with the file select screen. If thumbnail dis-
play is switched off, you can display six files on the screen at a time.
1
2
3
1
Display the file select screen.
Press
▲
or
▼
with the FOLDER select screen to select a folder
with files, and press.
* It has been set at the factory that the three-thumbnail file
select screen will appear first, but subsequently, the file select
screen designated previously will appear.
* When Media Navigation is started immediately after record-
ing, the three-thumbnail file select screen will appear.
* Even if the folder is changed, the thumbnail display method will not change.
* When you switch off a thumbnail, no thumbnails will be displayed no matter which folders you select.
2
Display a 9-thumbnail file select screen.
Press the REC MODE/THUMBNAIL button, and a 9-thumb-
nail file select screen will appear.
* Start Media Navigation (see page 42) and display the FOLDER
select screen to start.
* You can also use the remote control to operate.
File select screen
(3-thumbnail display)
File select screen
(9-thumbnail display)
3
Display a file select screen without thumb-
nails.
Press the REC MODE/THUMBNAIL button again.
Thumbnails will disappear and six files will be displayed on one
screen. Pressing the button again switches on the thumbnails
display.
* You cannot switch on or off the thumbnail display while the
menu is displayed, a folder is being changed (see page 50), or
the recording date/time are being changed (see page 64).
If the thumbnail display is not possible with files recorded by equipment other than MP-EG10W,
will
appear in place of thumbnails.
File select screen
(without thumbnails)