![background image](http://html.mh-extra.com/html/hitachi/mpegcam-mp-eg10w/mpegcam-mp-eg10w_instruction-manual_140926064.webp)
E31
________________Chapter 3
Recording
The MP-EG10W records moving pictures and audio.
* The illustrations used in the following text may be dif-
ferent from the actual pictures.
* Moving picture files recorded by the MP-EG10W
cannot be played back by the MP-EG1A.
* All files recorded by the MP-EG10W are saved once
in “folder 0” (see page 14): You cannot designate
another folder in advance.
Recording Moving Pictures
1
Set the CAM/OFF/PLAY switch to CAM.
Hold down the red button at the center of the switch and set the
switch to CAM. The image from the lens will appear on the
LCD monitor, and the MP-EG10W will enter the record pause
mode ("PAUSE" will appear).
2
Check that the "
" record mode indicator
appears.
If the "
" moving picture record mode indicator does not
appear, press the REC MODE/THUMBNAIL button repeated-
ly until it does.
3
Adjust the image size of subject.
Press the ZOOM/VOL button to adjust the image size of subject. Pressing T (tele) magnifies the image, and
pressing W (wide) makes it smaller.
Press the MACRO/SHIFT button when you want a closeup on a subject for recording (see page 37).
* When the ZOOM/VOL button is pressed, the zoom bar will appear on the left end of the LCD monitor.
3
6
1
2
5
0:00:00
PAUSE FINE
REM 0:15
10/24/1998
11:30AM
Zoom Bar
Zooming
The MP-EG10W can zoom in on a subject and enlarge it up to 6
times, 3 times the optical zoom multiplied by 2 times the digital
zoom. When the MP-EG10W enters the digital zoom area, the
zoom bar will change from white to yellow in the LCD monitor,
and the picture will be slightly rough in this area.
PAUSE FINE
10/24/1998
11:30AM
Indicates that the MP-EG10W
is in the record pause mode.
0:00:00
REM 0:15
Record Mode Indicator