![background image](http://html.mh-extra.com/html/hitachi/mpegcam-mp-eg10w/mpegcam-mp-eg10w_instruction-manual_140926071.webp)
E22
Chapter 2
Set-up
___________________
You can also use power supply from any AC outlet.
Using Power Supply from AC Outlet
Caution: Be sure to use the specified MP-
AC1A AC adapter/charger to use
power supply from AC outlet.
If you use AC adapter/chargers other
than the MP-AC1A, fire or electric
shock could result.
AC adapter/charger
(MP-AC1A)
DC power cord
AC ADAPTOR
POWER
CHARGE
POWER indicator
Core section
DC power cord
2
Connect the other end of the DC
power cord to the DC output jack
of the AC adapter/charger.
3
Plug the AC adapter/charger into
an AC outlet.
The red POWER indicator will light.
If the POWER indicator does not light:
If the POWER indicator of the AC adapter/charger
does not light, unplug the AC adapter/charger from
the AC outlet. Wait about 30 seconds, and try again
to plug it into the AC outlet. If the POWER indicator
still does not light, it is possible that the AC
adapter/charger is faulty. Unplug the AC
adapter/charger from the AC outlet and consult the
store where you purchased the MP-EG10W.
After use, close the lid for DC power cord connection
terminal, referring to the figure below.
Push the projection in the direction
of the arrow to close the lid.
1
Set the CAM/OFF/PLAY switch to OFF, and connect one end of the DC power
cord to the DC IN jack of the MP-EG10W.
The red POWER indicator will light.