Hioki BT3554-50 Скачать руководство пользователя страница 33

Страница: 33 / 188

Operating Precautions

Instrument’s batteries and fuse

WARNING

•

To avoid an electric shock, disconnect the test lead

from the object under measurement before open the

cover to replace the LR6 Alkaline batteries or fuse.

•

To prevent instrument damage or an electric shock,

use only the screw for securing the fuse cover in

place that is originally installed. If you have lost the

screw or find that the screw is damaged, please

contact your Hioki distributor for a replacement.

•

Use a

fuse only specified by Hioki.

Failure to observe this could damage the

instrument, resulting in bodily injury.

Specified fuse: Model

Z5050 Fuse Set (216.630,

Littelfuse Inc., fast-acting, rating: 250 V / F 630 mA,

interrupting rating: 1500 A)

•

Do not short-circuit, recharge ,or disassemble

LR6 Alkaline batteries, or dispose of them in fire.

Batteries may explode if mistreated.

•

Do not use the instrument with the fuse holder

short-circuited.

Failure to observe this could damage the

instrument, resulting in bodily injury.

HIOKI BT3554F961-00

Содержание BT3554-50





























































































































































































Результаты поиска

Содержание BT3554-50

Отзывы:

Hioki BT3554-50, Инструкция по эксплуатации, Страница: 33 / 188

Результаты поиска

Содержание BT3554-50

Отзывы: