Hioki BT3554-50 Скачать руководство пользователя страница 25

Страница: 25 / 188

Operating Precautions

Operating Precautions

Observe the following precautionary information to ensure that the

instrument can be used safely and in a manner that allows it to

perform as described in its specifications.

Use of the instrument should confirm not only to its specifications,

but also to the specifications of all accessories, options, LR6

Alkaline batteries, and other equipment in use.

Installing the instrument

CAUTION

Installing the instrument in inappropriate locations could

cause a malfunction of the instrument or an accident.

• Exposed to direct sunlight or high temperature

• Exposed to corrosive or combustible gases

•

Exposed to a strong electromagnetic fields or

electrostatic charges

• Near induction heating systems (such as high-frequency

induction heating systems and IH cooking equipment)

• Susceptible to vibration

• Exposed to water, oil, chemicals, or solvents

• Exposed to high humidity or condensation

• Exposed to high concentrations of dust particles

Do not place the instrument on an unstable or uneven

surface. Doing so could cause the instrument to fall or turn

over, causing bodily injury or damage to the instrument.

HIOKI BT3554F961-00

Содержание BT3554-50





























































































































































































Результаты поиска

Содержание BT3554-50

Отзывы:

Hioki BT3554-50, Инструкция по эксплуатации, Страница: 25 / 188

Результаты поиска

Содержание BT3554-50

Отзывы: