Hioki BT3554-50 Скачать руководство пользователя страница 161

Страница: 161 / 188

147

Replacing the Fuse

10.5 Replacing the Fuse

If the fuse has blown, replace it as described below.

WARNING

•

Use a fuse only specified by Hioki.

Failure to observe this could damage the instrument,

resulting in bodily injury.

Specified fuse: Model

Z5050 Fuse Set (216.630,

Littelfuse Inc., fast-acting, rating: 250 V / F 630 mA,

interrupting rating: 1500 A)

Turn off the instrument and

remove the test lead.

Using a Phillips screwdriver,

loosen the screw to remove the

fuse cover on the rear of the

instrument.

2, 4

New fuse

Remove the blown fuse and put

a specified new fuse in the fuse

holder.

Place the fuse cover and

tighten the screw.

IMPORTANT

Avoid hitting the fuse holders with a tool when replacing the fuse.

Deformation of a fuse holder could result in poor contact between

the fuse and holder, making measurement impossible.

HIOKI BT3554F961-00

Содержание BT3554-50





























































































































































































Результаты поиска

Содержание BT3554-50

Отзывы:

Hioki BT3554-50, Инструкция по эксплуатации, Страница: 161 / 188

Результаты поиска

Содержание BT3554-50

Отзывы: