Hioki BT3554-50 Скачать руководство пользователя страница 21

Страница: 21 / 188

Safety Information

Safety Information

This instrument is designed to conform to IEC 61010 Safety

Standards, and has been thoroughly tested for safety prior to

shipment. However, using the instrument in a way not described in

this manual may negate the provided safety features.

Carefully read the following safety notes before using the

instrument.

DANGER

Mishandling the instrument could result in bodily

injury or even death, as well as damage to the

instrument. Familiarize yourself with the instructions

and precautions in this manual before use.

WARNING

Electricity can potentially cause serious events such

as an electric shock, heat generation, fire, and an arc

flash due to a short-circuit. If you have not used any

electrical measuring instruments before, you should

be supervised by a technician who has experience in

electrical measurement.

Protective gear

WARNING

Performing measurement using this instrument

involves live-line work. To prevent an electric shock,

use appropriate protective insulation and adhere to

applicable laws and regulations.

HIOKI BT3554F961-00

Содержание BT3554-50





























































































































































































Результаты поиска

Содержание BT3554-50

Отзывы:

Hioki BT3554-50, Инструкция по эксплуатации, Страница: 21 / 188

Результаты поиска

Содержание BT3554-50

Отзывы: