manualshive.com logo in svg

Hioki BT3554-50, Инструкция по эксплуатации, Страница: 22 / 188

Поделиться
Скачать
Hioki BT3554-50 Скачать руководство пользователя страница 22

8

Safety Information

Symbols and abbreviations

In this document, the severity levels of risk and hazard are classified 

as follows.

 DANGER

Indicates an imminently hazardous situation 

that will result in death of or serious injury to the 

operator.

 WARNING

Indicates a potentially hazardous situation that 

may result in death of or serious injury to the 

operator.

 CAUTION

Indicates a potentially hazardous situation 

that may result in minor or moderate injury to 

the operator or damage to the instrument or 

malfunction.

IMPORTANT

Indicates information or content that is particularly 

important from the standpoint of operating or 

maintaining the instrument.
Indicates useful advice concerning instrument 

performance and operation.

Indicates a high voltage hazard. Failure to verify 

safety or improper handling of the instrument 

could lead to an electric shock, burn, or death.

Indicates an action that must not be performed.

Indicates an action that must be performed.

HOLD

Indicates a control key.

[HOLD]

Indicates elements on the display.

HIOKI BT3554F961-00

HIOKI BT3554F961-00

Содержание BT3554-50





























































































































































































Отзывы:

Нет отзывов