61
_____________________________________________________________________________________________
9.3 General Settings
______________________________________________________________________________________________
9.2.2 Changing Monitoring Settings
9.2.3 Deleting a Registered Logger
9.3 General Settings
File Name
This setting is available when selecting [
Set in advance
]. Type in the
filename for received waveform files. The files are saved using the set
filename with added serial numbers.
OK/Cancel
Click the <
OK
> button to register the logger for the logger-monitoring
program and display it in the list.
Click the <
Cancel
> button to cancel the settings.
You can change the monitoring settings of loggers registered for the logger-
monitoring program. Select a logger you want to change the monitoring
settings from the list. Click the <
Properties
> button to display the
"
Properties
" dialog box. The settings in this dialog box are the same as those
in the "
Register
" dialog box.
Select a logger you want to delete from the list, then press the
Delete
key.
Click the <
Option
> button to display the "
Option
" dialog box. This dialog
box allows you to edit the general settings of the logger-monitoring program
as shown below.
Listen Port
Set a port number used to receive events from the loggers. If the port
number setting has not been edited on the logger, leave this at the "
9000
"
default setting. For details, see 2.4, "LAN Settings."
Click the <
Default
> button to reset the port number to "
9000
."
