15
_____________________________________________________________________________________________
4.1 Preparing for Real-time Data Acquisition
______________________________________________________________________________________________
4.1.3 Settings of MEMORY HiLOGGERs
Click the icon of a MEMORY HiLOGGER registered for a measurement
system. The "
Settings
" page for the MEMORY HiLOGGER will then
appear. On this page, you can send or receive setting data with the
MEMORY HiLOGGER, and edit the general MEMORY HiLOGGER
settings.
Setting IP address and Port number
To change the IP address or port number of a MEMORY HiLOGGER, click
the <
...
> button. The "
Change
" dialog box will then appear. Type in a new
address or port number.
For the port number, use the number set on the MEMORY HiLOGGER with
the low-order digit changed to 0. For instance, when "
880X
" is set on the
MEMORY HiLOGGER, change the "
X
" to "
0
" and use "
8800
" instead.
Obtaining Logger Information
After registering a MEMORY HiLOGGER for a measurement system, you
must obtain such logger information as the Model number and connected
device. Click the <
Get Info
> button to communicate with the MEMORY
HiLOGGER. The Model number and connected device will then be
displayed. In case of no response, check for proper LAN cable connection
and whether the IP address and port number are correct.
