29
_____________________________________________________________________________________________
5.4 Using Cursors
______________________________________________________________________________________________
5.4.1 Positioning Cursors
NOTE
During real-time measurement, you cannot position the cursors. However, you can
position them when the waveform display update is temporarily interrupted (refer to
4.2 "Starting a Real-time Data Acquisition Program").
5.4.2 Activating and Deactivating Cursors
5.4 Using Cursors
You can use cursors A and B to display cursor positions, dates, times, and
various types of cursor interval calculation results.
Click the
toolbar
buttons shown on the left, then move the mouse pointer in
the waveform viewer so it appears as a black arrow. Click the desired
position to set the cursor and an A mark or B mark appears at the top of the
waveform viewer.
If you click the button on the toolbar once more, the logger communicator
exits the setting mode.
To move the cursors, drag the A mark or B mark to a different location.
On the [
View
] menu, click [
Cursor A
] or [
Cursor B
] to activate or deactivate
the corresponding cursor.
You can also click the
toolbar
buttons shown on the left.