Hioki 8910, Инструкция по эксплуатации

Страница: 110 / 150

10.1 Using the 8910 with the 8826 MEMORY HiCORDER
102
10.1.5 Setting logic channel output
•The cursor keys can be used to move the
cursor to any item indication except those in
the 8910 CH column.
•The function keys can be used to change
the value of a selected item.
•Clicking the [ F3 ] (COMMENT function key)
automatically sets the signal name
contained in CAN definition data as 8826
comment data.
Item Description
Setting
range
1. 8910 CH
Logic output channels (fixed) of the
8910
A0 to F3
2. Logic CH output
data
• Used to select CAN definition data
to be output from a logic channel of
the 8910.
• The label name is displayed.
• Each time the [
F5
] (ID TRIGGER
function key) is clicked, selection
toggles between the 8910 ID trigger
output channel and normal signal
output channel.
• When the ID trigger output channel
is selected, the ID trigger and
applicable ID are displayed.
OFF,
1 to registered
data count,
ID trigger
setting
3. Bit position
setting
When the selected CAN definition data
is 2 bits or more, this setting is used to
select the bits to be output.
0 to data length
of applicable
CAN definition
data - 1
4. 8826 input
channel
Used to set the data input channel on
the 8826. This is not a setting item for
the 8910. This information is required
to reflect the scaling value and signal
name on the 8826.
A1 to H4
1. 2. 3. 4.
Setting changes made here are not reflected on the 8910 until data
transmission (Section 10.1.7, 104p.) is performed.