Hioki 8910, Инструкция по эксплуатации, Страница: 88 / 150

7.3 Massage ID Trigger
80
7.3.2 Setting output channels
Multiple logic channels can be specified for ID trigger output.
Double-clicking a logic channel to be specified as an output channel
changes the corresponding icon to red and sets the channel as an
output channel.
When a channel is set as an output channel, the icon changes to red.
Moreover, the signal name column shows [
ID TRIGGER ] and the label
name column indicates the message ID set as a trigger. The Bit will be
fixed at 1.
1
Double-click a logic channel.
• When a channel already assigned with output data is specified, that
channel outputs both the assigned data and ID trigger simultaneously.
When reliable detection of the ID trigger is important, select a channel
without output data assigned.
• When the ID filter is enabled, the ID set with the ID trigger function is
filtered, thus disabling the ID trigger. (When the ID set with the ID trigger
function is allocated to another channel, i.e., not that of the ID trigger, the
ID trigger is enabled.)