58
When you finish typing the pin code, press "Enter". The unit announces, "Please
wait for authentication". If the remote device is setup correctly, and has not been
set up to allow this device to always connect, the remote device also asks for a
pin code. Please be sure to enter the same pin code on both devices. If the remote
Bluetooth device pin code matches the pin code on the Polaris MINI, the service
should authenticate. If connection is successful, the unit announces, "PIN code
authentication accepted".
You are then prompted, "Please wait. Access permission". If the remote Bluetooth
device does not give access permission, the unit says, "Connection failed", and
you are returned to the Bluetooth Services List. If the remote Bluetooth device
gives you access permission, the Polaris MINI says "Connection succeeded". If
the connection succeeds, "Connected" is displayed after the service in the
Bluetooth Service List. Some services may be connected without inputting a pin
code depending on the Remote Bluetooth device settings.
3.4 Backup/Restore Polaris Settings
If you hard reset your Polaris or initialize the Polaris Options, the main option
settings and settings for each program are initialized to the default values. If you
have created a backup of your settings, you can restore the option settings after
the hard reset.
You can run this utility by pressing K from the "Settings" menu. You can also
launch the "Backup/Restore Polaris Settings" dialog from anywhere on the unit by
pressing "F3-K".
