50
"Space-F3". Navigate the items in the Profile list using "Space-1" and "space-4".
Press "Enter" to activate one of the buttons.
Use the "Add" button: to manually add a profile, specifically where an SSID is
hidden, and thus does not appear in the "access points" list. The "Add" dialog"
contains 10 controls.
1) "Setup IP: Automatic" combo box: You can switch between automatic and
manual by pressing "Space-4" or "Space-1". If you select "Manual", you must
enter your IP address, subnet mask, gateway IP address, and DNS IP address.
You can move among these computer edit boxes by pressing "Space-4" or
"Space-1". Press "tab (Space-4-5)" to move to the next control.
2) "Network name (SSID)" computer edit box: Type the network ID in the computer
edit box.
3) "Network mode" combo box: You can select among "Infrastructure", and
"802.11 ad-hoc" mode by pressing "Space-1" or "Space-4".
4) "Network authentication mode" combo box: Select among "Open", "Shared",
"WPA-PSK", and "WPA2-PSK" by pressing "Space-1" or "Space-4".
5) "Data encryption" combo box: Select the data encryption method by pressing
"Space-1" or "Space-4". If you select "Open" or "Shared" in network authentication
mode, you can choose among "Disable" and "WEP". And if you select "WPA-
PSK" or "WPA2-PSK" in network authentication mode, either "AES" or "TKIP" can
be selected in the "Data encryption" combo box.