15
en
3. Technical data
WSC255-KE
WSC265-KE
(Keyless/constant-speed
(Keyless/constant-speed
electronics)
electronics)
Rated power:
1400 W
1500 W
1600 W
Power output:
790 W
800 W
890 W
Nominal voltage
✱
110 V
230 V
110 V
230 V
Nominal current input
✱
13.3 A
6.4 A
14.6 A
7.3 A
Spindle speed under no load:
4300/min. (setting 6)
4300/min. (setting 6)
Spindle speed under load (settings1–6):
1900–4300/min.
1900–3900/min.
Blade peripheral speed under no load:
36 m/sec. (setting 6)
40,5 m/sec. (setting 6)
Blade peripheral speed under load:
36 m/sec. (setting 6)
36,7 m/sec. (setting 6)
Cutting depth at 0°:
0–55 mm
0–65 mm
Cutting depth at 45°:
0–43 mm
0–51 mm
Angular adjustment:
0°–45°
0°–45°
Saw blade specification:
– Maximum saw blade diameter:
160 mm
180 mm
– Minimum saw blade diameter:
144 mm
162 mm
– Blade mounting hole diameter:
20 mm
20 mm
– Maximum blade (steel disc) thickness:
< 1.3 mm
< 1.5 mm
– Kerf width:
1.7–2.2 mm
1.9–2.4 mm
– Minimum rated blade speed when idling (n):
n
≥
4700/min.
n
≥
4400/min.
Riving knife thickness:
1.3 mm
1.5 mm
Dust extraction connector internal dia.:
35 mm
35 mm
Weight as per EPTA-Procedure 01/2003:
4.4 kg
4.5 kg
Electrical protection class as per EN 60745:
Z
/ II (double insulated)
Z
/ II (double insulated)
Interference immunity
as per EN 55014-2
as per EN 55014-2
Radio and television interference suppression
as per EN 55014-1
as per EN 55014-1
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary asses-
sment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working peri-
od. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Noise and vibration information
(in accordance with EN 60745)
WSC 255-KE
WSC 265-KE
Typical A-weighted sound power level:
100 dB (A)
100 dB (A)
Typical A-weighted emission sound pressure level:
89 dB (A)
89 dB (A)
For the given sound power level as per EN 60745, the tolerance is 3 dB.
Wear ear protection!
Triaxial vibration value (vibration vector sum)
Cutting wood (a
h
)
2.5 m/s
2
2.5 m/s
2
Uncertainty (K) for triaxial vibration value
1.5 m/s
2
1.5 m/s
2
✱
The tool is offered in different versions for various mains voltages. Please refer to the information on the
type plate for the nominal voltage and nominal current input of your tool.
Right of technical changes reserved.
Printed: 07.07.2013 | Doc-Nr: PUB / 5071325 / 000 / 00
