Hillrom Vest 105, Инструкция по эксплуатации

Страница: 31 / 94

The Vest® Airway Clearance System, Model 105 23
Instructions for Use (145330 REV 18)
Instructions for Use
4. Adjust the hook-and-loop fasteners on the
shoulder straps so the bottom of each arm
opening of the Chest Vest is comfortably
close to the underarm.
5. Detach both back panel tabs from the front
of the Chest Vest.
6. For the best fit, inhale deeply, and then
secure both back panel tabs to the front
panel. You should be able to fit a flat hand
between the Chest Vest and the body.
7. Make sure the Chest Vest fits close to the
body without being uncomfortably snug.
• To tighten the fit at the bottom edge,
angle the back panel tabs upward .
• To loosen the fit at the bottom edge,
angle the back panel tabs downward .
8. Adjust the shoulder straps so that the
bottom of each arm opening of the
inflatable garment is comfortably close to
the underarm.
Assemble the C3® Washable Garment
The C3® Washable Garment will arrive to you in two pieces and will need
to be assembled as follows. The Classic Full Vest does not need to be
assembled, For the Classic Full Vest, go to “Fitting the C3® Washable
Garment and the Classic Full Vest” on page 24.
To assemble the Child Small through Adult Sizes:
1. Lay the outer garment flat.
2. Open the zipper on the bottom of the outer
garment.
3. Put the inflatable bladder into the outer
garment.
4. Put the air duct pipes through the outer
garment.
5. Press the studs to attach the bladder to the
outer garment.