Hillrom Vest 105, Инструкция по эксплуатации

Страница: 39 / 94

The Vest® Airway Clearance System, Model 105 31
Instructions for Use (145330 REV 18)
Use The Vest® Airway Clearance System, Software Version 1.20
2. Press the UP arrow button
above OPTIONS .
3. Press the Down arrow
button below New Pgm to
create a new program. The
screen will show the
Frequency, Pressure, and
treatment Time settings
for the first Programming
Point.
NOTE:
All the settings can be
adjusted.
4. For Programming Point 1,
if the settings match the
prescribed treatment,
continue to step 3.
Otherwise, adjust the
settings to match the
prescription by pressing
the
Up and Down arrow buttons associated with Frequency, Pressure,
and treatment Time.
5. Once you have set Programming Point 1, proceed to Programming
Point 2 by pressing the
ON button (to move to a previous
Programming Point, press the OFF button). Adjust the settings to
match the prescription and repeat for all 8 Programming Points.
NOTE:
If the prescription does not call for all 8 Programming Points, after
programming the last prescribed programming point, set the Time to 0
MIN for the following segment.
Once you change the Programming Point Time to 0 MIN and press the ON
button, it will take you to the start of the program to begin therapy.
6. Press the ON button. The
inflatable garment will
inflate.
7. Press the ON button
again to begin the
treatment program. The
set treatment Time shows
as it counts down to zero for each Programming Point.