HIKVISION DS-K3B802X Series Скачать руководство пользователя страница 97

Страница: 97 / 147

5. Click Import to start importing the person information to the client.

Note

Up to 2,000 persons and 5,000 cards can be imported.

The person information, including person details, person's fingerprint information (if

configured), and the linked cards (if configured), will be imported to the selected organization.

8.4.19 Move Persons to Another Organization

You can move the added persons to another organization if you need.
Before You Start

●

Make sure you have added at least two organizations.

●

Make sure you have imported person information.

Steps
1. Enter Person module.
2. Select an organization in the left panel.

The persons under the organization will be displayed in the right panel.

3. Select the person to move.
4. Click Change Organization.
5. Select the organization to move persons to.
6. Click OK.

8.4.20 Issue Cards to Persons in Batch

The client provides a convenient way to issue cards to multiple persons in a batch.
Steps
1. Enter Person module.
2. Click Batch Issue Cards.

All the added persons with no card issued will be displayed in the right panel.

3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need

issuing cards.

4. Optional: Click Settings to set the card issuing parameters. For details, refer to Issue a Card by

Local Mode .

5. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing

cards.

6. Click the Card No. column and enter the card number.

Place the card on the card enrollment station.

Swipe the card on the card reader.

Manually enter the card number and press the Enter key.

DS-K3B802X Series Swing Barrier User Manual

Содержание DS-K3B802X Series




















































































































































Результаты поиска

Содержание DS-K3B802X Series

Отзывы:

HIKVISION DS-K3B802X Series, Руководство пользователя, Страница: 97 / 147

Результаты поиска

Содержание DS-K3B802X Series

Отзывы: