HIKVISION DS-K3B802X Series Скачать руководство пользователя страница 29

Страница: 29 / 147

3.2 Install Pedestals

Before You Start

Prepare for the installation tools, check the device and the accessories, and clear the installation

base.
Steps

Note

●

The device should be installed on the concrete surface or other non-flammable surfaces.

●

The dimension is as follows.

Figure 3-10 Dimension

1. Prepare for the installation tools, check the components, and prepare for the installation base.
2. Drill holes on the ground according to the installation holes on the pedestals and insert the

expansion sleeves.

3. According to the entrance and exit marks on the pedestals, move the pedestals to the

corresponded positions.

Note

Make sure the installation holes on the pedestals and the base are aligned with each other.

4. Secure the pedestals with expansion bolts.

Note

●

Do not immerse the pedestal in the water. In special circumstances, the immersed height

should be no more than 150 mm.

●

The installation footprint is as follows:

DS-K3B802X Series Swing Barrier User Manual

Содержание DS-K3B802X Series




















































































































































Результаты поиска

Содержание DS-K3B802X Series

Отзывы:

HIKVISION DS-K3B802X Series, Руководство пользователя, Страница: 29 / 147

Результаты поиска

Содержание DS-K3B802X Series

Отзывы: