manualshive.com logo in svg

HIKVISION DS-K3B802X Series, Руководство пользователя, Страница: 122 / 147

Поделиться
Скачать
HIKVISION DS-K3B802X Series Скачать руководство пользователя страница 122

2. Select the access control device from the list on the left.
3. Click Add button to add a new linkage.
4. Select the event source as Event Linkage.
5. select the event type and detailed event to set the linkage.
6. In the Linkage Target area, set the property target to enable this action.

Buzzer on Controller

The audible warning of access control device will be triggered.

7. Click Save.
8. Optional: After adding the device linkage, you can do one or more of the following:

Edit Linkage

Settings

Select the configured linkage settings in the device list and you can edit its

event source parameters, including event source and linkage target.

Delete Linkage

Settings

Select the configured linkage settings in the device list and click Delete to

delete it.

8.8.3 Configure Device Actions for Card Swiping

You enable access control device's linkage actions (such as disarming a zone and triggering audio

prompt) for the swiping of a specific card, In this way, you can monitor the card holder's behaviors

and whereabouts.
Steps

Note

It should be supported by the device.

1. Click Access Control → Linkage Configuration .
2. Select the access control device from the list on the left.
3. Click Add to add a new linkage.
4. Select Card Linkage as the event source.
5. Enter the card number or select the card from the drop-down list.
6. Select the card reader where the card swipes.
7. In the Linkage Target area, set the property target to enable this action.

Buzzer on Controller

The audible warning of access control device will be triggered.

Buzzer on Reader

The audible warning of card reader will be triggered.

Capture

An event-related picture will be captured when the selected event happens.

Recording

DS-K3B802X Series Swing Barrier User Manual

108

Содержание DS-K3B802X Series




















































































































































Отзывы:

Нет отзывов