HIKVISION DS-K3B802X Series Скачать руководство пользователя страница 127

Страница: 127 / 147

Steps
1. Click → Tool → Device Arming Control to open Device Arming Control page.

All the added devices appear on this page.

2. Optional: If there are to many devices, enter the key words in Filter filed to filter the device(s)

you want.

Note

For the filtered devices, you can click Arm All or Disarm All to enable receiving event of these

devices.

3. In the Auto-Arming column, turn on the switch to enable auto-arming.

Figure 8-16 Arm Device

After turned on, the device(s) will be armed. And notifications about the events triggered by the

armed device(s) will be automatically sent to the client software in real-time.

8.10.2 View Real-Time Events

The real-time event information received by the client of the connected resources are displayed.

You can check the real-time event information, including event source, event time, priority, etc.
Before You Start

Enable receiving events from devices before the client can receive event from the device, see

Enable Receiving Event from Devices for details.

DS-K3B802X Series Swing Barrier User Manual

113

Содержание DS-K3B802X Series




















































































































































Результаты поиска

Содержание DS-K3B802X Series

Отзывы:

HIKVISION DS-K3B802X Series, Руководство пользователя, Страница: 127 / 147

Результаты поиска

Содержание DS-K3B802X Series

Отзывы: