manualshive.com logo in svg

HIKVISION DS-K3B802X Series, Руководство пользователя, Страница: 79 / 147

Поделиться
Скачать
HIKVISION DS-K3B802X Series Скачать руководство пользователя страница 79

Caution

The password strength of the device can be automatically checked. We highly recommend

you change the password of your own choosing (using a minimum of 8 characters, including

at least three kinds of following categories: upper case letters, lower case letters, numbers,

and special characters) in order to increase the security of your product. And we recommend

you change your password regularly, especially in the high security system, changing the

password monthly or weekly can better protect your product.

Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user.

6. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS

(Transport Layer Security) protocol for security purpose .

Note

●

This function should be supported by the device.

●

If you have enabled Certificate Verification, you should click Open Certificate Folder to open

the default folder, and copy the certificate file exported from the device to this default

directory to strengthen the security. See for details about enabling certificate verification.

●

You can log into the device to get the certificate file by web browser.

7. Check Synchronize Time to synchronize the device time with the PC running the client after

adding the device to the client.

8. Optional: Check Import to Group to create a group by the device name, and import all the

channels of the device to the group.

9. Finish adding the device.

-

Click Add to add the device and back to the device list page.

-

Click Add and New to save the settings and continue to add other device.

Import Devices in a Batch

You can add multiple devices to the client in a batch by entering the device parameters in a pre-

defined CSV file.
Steps
1. Enter the Device Management module.
2. Click Device tab on the top of the right panel.
3. Click Add to open the Add window, and then select Batch Import as the adding mode.
4. Click Export Template and then save the pre-defined template (CSV file) on your PC.
5. Open the exported template file and enter the required information of the devices to be added

on the corresponding column.

Note

For detailed description of the required fields, refer to the introductions in the template.

DS-K3B802X Series Swing Barrier User Manual

65

Содержание DS-K3B802X Series




















































































































































Отзывы:

Нет отзывов