HIKVISION DS-K3B802X Series Скачать руководство пользователя страница 108

Страница: 108 / 147

When you inputting the password on the card reader, if the interval between pressing two

digits is larger than the set value, the digits you pressed before will be cleared automatically.

Tampering Detection

Enable the anti-tamper detection for the card reader.

Communicate with Controller Every

When the access control device cannot connect with the card reader for longer than the set

time, the card reader will turn offline automatically.

Fingerprint Recognition Level

Select the fingerprint recognition level in the drop-down list.

5. Click OK.
6. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to

the selected card reader(s).

Configure Parameters for Alarm Output

After adding the access control device, if the device links to alarm outputs, you can configure the

parameters.
Before You Start

Add access control device to the client, and make sure the device supports alarm output.
Steps
1. Click Access Control → Advanced Function → Device Parameter to enter access control

parameter configuration page.

2. In the device list on the left, click to expand the door, select an alarm input and you can edit

the alarm input's parameters on the right.

3. Set the alarm output parameters.

Name

Edit the card reader name as desired.

Alarm Output Active Time

How long the alarm output will last after triggered.

4. Click OK.
5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output.

Configure Parameters for Lane Controller

After adding the lane controller to the client, you can configure its parameters for passing through

the lane.

DS-K3B802X Series Swing Barrier User Manual

Содержание DS-K3B802X Series




















































































































































Результаты поиска

Содержание DS-K3B802X Series

Отзывы:

HIKVISION DS-K3B802X Series, Руководство пользователя, Страница: 108 / 147

Результаты поиска

Содержание DS-K3B802X Series

Отзывы: